Wilbers Products GmbH / Tolles Fahrwerk! / Ihr Fahrwerksspezialist aus Nordhorn / Unsere Marken: Wilbers Racing Suspension, Wilbers Sports Line, Wilbers Classic Line, Wilbers Eco Line, Promoto, Hyperpro, Hagon, Heat Pro

Cartridge-locknut-clamp

When you pushed down the preload-bushing far enough using the cartridge-pusher you’ll need the cartridge-locknut-clamp. After you installed the locknut-clamp below the nut, you can remove the upper plug without any problems. The cartridge-locknut-clamp is a useful tool fabricated of galvanized steel. Our recommended sales price is 39 Euro per piece.

Order-No	Tools	*Price
200-010-00	Cartridge-degasser-tool	€ 29,-

	Spring-press With the help of the spring-press you can, without much effort, disassemble and assemble your.... >> more		Length-measuring-tool This special tool for length measuring is a necessity for every suspension system expert. It is, so to... >> more
	Nitrogen-filler This special utensil serves the refilling of shock-absorbers, whose reservoirs are sealed with a rubber plug, with nitrogen. The ... >> more		Oilseal-pusher After opening the telescopic-fork, the work continues. With the help of this pusher-tool the bushing above the spring is pressedt... >> more
	Shaft-seal-tool This tool is necessary to insert a shaft seal into its seating without damage. It contains of two halves connected by... >> more		Cartridge-degasser-tool When you pushed down the preload-bushing far enough using the cartridge-pusher you’ll need the... >> more
	Cartridgeentlüfter The disassembly is always followed by the assembly. For that you’ll need all those tools again. The Cartridge-degasser-tool is... >> more

Home Company Products Workshop Production Racing Team

Forks /FedernFork springs & oil Fork recontrsuction Piston kit Fork shaft seals Inner tubes & outer-tubes Replacement springs

Cartridge-locknut-clamp

Shock absorber

Steering damper

Lowering- and Raising ride height

Other