Wilbers Products GmbH / Tolles Fahrwerk! / Ihr Fahrwerksspezialist aus Nordhorn / Unsere Marken: Wilbers Racing Suspension, Wilbers Sports Line, Wilbers Classic Line, Wilbers Eco Line, Promoto, Hyperpro, Hagon, Heat Pro

Spring-press

With the help of the spring-press you can, without much effort, disassemble and assemble your shock absorber. The tool was machined of solid steel and can be fixed to the workbench by means of four screws. This way it guarantees safe working conditions.

Order-No	Tools	*Price
200-002-00	Spring-press	€ 349,-

	Spring-press With the help of the spring-press you can, without much effort, disassemble and assemble your.... >> more		Length-measuring-tool This special tool for length measuring is a necessity for every suspension system expert. It is, so to... >> more
	Nitrogen-filler This special utensil serves the refilling of shock-absorbers, whose reservoirs are sealed with a rubber plug, with nitrogen. The ... >> more		Oilseal-pusher After opening the telescopic-fork, the work continues. With the help of this pusher-tool the bushing above the spring is pressedt... >> more
	Shaft-seal-tool This tool is necessary to insert a shaft seal into its seating without damage. It contains of two halves connected by... >> more		Cartridge-degasser-tool When you pushed down the preload-bushing far enough using the cartridge-pusher you’ll need the... >> more
	Cartridgeentlüfter The disassembly is always followed by the assembly. For that you’ll need all those tools again. The Cartridge-degasser-tool is... >> more

Home Company Products Workshop Production Racing Team

Forks /FedernFork springs & oil Fork recontrsuction Piston kit Fork shaft seals Inner tubes & outer-tubes Replacement springs

Spring-press

Shock absorber

Steering damper

Lowering- and Raising ride height

Other